Built-in circuit elementcable7
7-wire cable
Ready-made cable (e.g. JST PHR-7 on both ends, 1:1). Model per wire: series resistance + capacitance to the ground wire (wire 7).
Key data
- Category
- Connectors
- Simulation model
- Built-in circuit element
- Reference prefix
- W
- Pins
- 14
Simulation model
Dedicated model built into the simulator for this part (see the description).
- Primitive
- MODEL
Pins 14
| Pin | Name | Use |
|---|---|---|
| A1 | 1Passive pin | Wire end: A n and B n are the two ends of wire n |
| B1 | 1Passive pin | Wire end: A n and B n are the two ends of wire n |
| A2 | 2Passive pin | Wire end: A n and B n are the two ends of wire n |
| B2 | 2Passive pin | Wire end: A n and B n are the two ends of wire n |
| A3 | 3Passive pin | Wire end: A n and B n are the two ends of wire n |
| B3 | 3Passive pin | Wire end: A n and B n are the two ends of wire n |
| A4 | 4Passive pin | Wire end: A n and B n are the two ends of wire n |
| B4 | 4Passive pin | Wire end: A n and B n are the two ends of wire n |
| A5 | 5Passive pin | Wire end: A n and B n are the two ends of wire n |
| B5 | 5Passive pin | Wire end: A n and B n are the two ends of wire n |
| A6 | 6Passive pin | Wire end: A n and B n are the two ends of wire n |
| B6 | 6Passive pin | Wire end: A n and B n are the two ends of wire n |
| A7 | 7Passive pin | Wire end: A n and B n are the two ends of wire n |
| B7 | 7Passive pin | Wire end: A n and B n are the two ends of wire n |
Parameters 2
Resistance per wire
RDefault0.1 Ω
Capacitance per wire
CDefault5p F
PCB
No land pattern: the part is not placed on the board.