Behavioural mixed-signal modelG7LX-A88S7-BP-GYrj45_magjack
RJ45 jack with magnetics and LEDs
RJ45 jack for 10/100 Ethernet with integrated magnetics (TD±, RD± with centre taps TCT / RCT, Bob Smith termination R1–R4) and two LEDs (green, yellow; anode / cathode). Plugged in: a network cable (the PHY behind it reports link), or nothing.
Key data
- Category
- Connectors
- Simulation model
- Behavioural mixed-signal model
- Manufacturer part number
- G7LX-A88S7-BP-GY
- Reference prefix
- J
- Pins
- 15
- Land pattern
- RJ45_Kycon_G7LX-A88S7-BP-xx_Horizontal
Simulation model
A behavioural model implements the interface of the chip (registers, protocol, timing) at its pins. The pins are connected to the analog circuit like CMOS pins.
- Model
- rj45_magjack
- Supply pins
- TCT / SHIELD
Pins 15
| Pin | Name | Use |
|---|---|---|
| TD+ | TD+Passive pin | Contact: carries a signal or supply wire |
| TD- | TD-Passive pin | Contact: carries a signal or supply wire |
| RD+ | RD+Passive pin | Contact: carries a signal or supply wire |
| TCT | TCTPassive pin | Contact: carries a signal or supply wire |
| R1 | R1Passive pin | Contact: carries a signal or supply wire |
| RD- | RD-Passive pin | Contact: carries a signal or supply wire |
| RCT | RCTPassive pin | Contact: carries a signal or supply wire |
| R2 | R2Passive pin | Contact: carries a signal or supply wire |
| R4 | R4Passive pin | Contact: carries a signal or supply wire |
| R3 | R3Passive pin | Contact: carries a signal or supply wire |
| LEDY_K | LEDY_KPassive pin | Contact: carries a signal or supply wire |
| LEDY_A | LEDY_APassive pin | Contact: carries a signal or supply wire |
| LEDG_K | LEDG_KPassive pin | Contact: carries a signal or supply wire |
| LEDG_A | LEDG_APassive pin | Contact: carries a signal or supply wire |
| SHIELD | SHIELDGround pin | Ground |
Parameters 1
Plugged in
pluggedDefaultnetwork
networknone
network: an Ethernet cable to a switch / router (link up); none: no cable
PCB
Verified land pattern
RJ45_Kycon_G7LX-A88S7-BP-xx_Horizontal| Package | Land pattern | Status | Source |
|---|---|---|---|
| right angle · G7LX-A88S7-BP-GY | RJ45_Kycon_G7LX-A88S7-BP-xx_Horizontal | Verified land pattern | KiCad 10.0.7: symbol Connector:RJ45_Kycon_G7LX-A88S7-BP-GY, footprint Connector_RJ:RJ45_Kycon_G7LX-A88S7-BP-xx_Horizontal |