Behavioural mixed-signal modelSSD1306 0.96" I2C modulessd1306
OLED 0.96" 128×64 (SSD1306, I²C)
Monochrome OLED module with SSD1306 controller on the I²C bus (address 0x3C, solder bridge 0x3D). The image appears in the live window as with the TFT. Drive e.g. with Adafruit_SSD1306 + Adafruit_GFX.
Key data
- Category
- Modules
- Simulation model
- Behavioural mixed-signal model
- Manufacturer part number
- SSD1306 0.96" I2C module
- Reference prefix
- DS
- Pins
- 4
- Land pattern
- PinHeader_1x04_P2.54mm_Vertical
Simulation model
A behavioural model implements the interface of the chip (registers, protocol, timing) at its pins. The pins are connected to the analog circuit like CMOS pins.
- Model
- ssd1306
- Supply pins
- VCC / GND
Pins 4
| Pin | Name | Use |
|---|---|---|
| GND | GNDGround pin | Ground |
| VCC | VCCSupply pin | Supply (see the module: usually 3.3–5 V) |
| SCL | SCLInput pin | I²C clock: sensors, displays; pull-up (about 4.7 kΩ) to the supply |
| SDA | SDAI/O pin | I²C data: pull-up (about 4.7 kΩ) to the supply |
Parameters 2
I²C address
addrDefault0x3C
0x3C0x3D
Resolution
sizeDefault128x64
128x64128x32
PCB
Connector / off-board
PinHeader_1x04_P2.54mm_VerticalOLED 0.96" 128×64 (SSD1306, I²C) as a module on a 4-pin header (GND, VCC, SCL, SDA) – compare the order with your own module